Multi-Unit & Commercial Programs
Documented vent service for apartments, condos, salons, and laundromats.
Learn moreNew Construction & Commercial · From Quote
New-Construction Vent Install
The cheapest time to get a dryer vent right is before the drywall goes up. We work with builders and GCs to route the shortest legal run, install smooth rigid metal duct with protected penetrations, and set a proper exterior termination — all per IRC M1502 and the dryer manufacturer's installation manual. Every rough-in is photographed before cover so the inspection record exists even after the walls close. At trim-out we return to connect, test airflow, and hand over documentation the homeowner can keep. Builders get fewer red tags and zero year-one warranty calls about towels that won't dry.
Duration
Scheduled with your builder
Warranty
1-year workmanship
Credentials
Licensed & Insured
Human reply
< 2 min
What is it
What is new-construction vent install?
New-construction install is the dryer vent done right the first time: route engineered before framing closes, smooth rigid metal duct with protected penetrations, a properly flashed exterior termination, and documentation photographed before drywall hides the work. Builders usually hand the dryer duct to whichever trade is nearby, which is how new homes end up with thirty-foot attic runs and soffit terminations that fail inspection or, worse, pass and fail the homeowner later. A specialist rough-in costs little at framing stage and buys the builder fewer red tags, and the buyer a laundry room that works from the first load.
Common signs you need this service
- You're a builder or GC with laundry rooms far from exterior walls on current plans
- Past projects drew inspector comments on dryer exhaust length or termination
- A custom-home client has specified a particular dryer with strict venting requirements
- Plans call for second-floor or island laundry rooms
- You want exhaust documentation to include in the buyer's closing package
- A remodel is relocating the laundry and the vent path is undecided
Every new-construction vent install includes:
- Route plan with developed-length math submitted for approval
- Rigid metal rough-in with pre-drywall photo record
- Exterior termination set and sealed to the envelope
- Trim-out connection with final airflow verification
Materials we use
Smooth-interior rigid metal duct and elbowsExterior termination hood with backdraft damper and flashingNail-plate protection at framing penetrationsUL-listed foil tape and duct supports
Built to code
The code your new-construction vent install has to meet.
A new-construction vent install isn't a matter of opinion — it's held to published national standards. Prime Dryer Vent builds every job to the named codes below and documents it, so the work is provably right for an inspector, an insurer, or a future buyer. These are the universal standards; your city's permit and inspection requirements are confirmed with the local authority before we pull the job.
IRC M1502UL 2158AIRC
IRC M1502
New dryer exhaust installs must use rigid metal duct within length limits, terminate outdoors away from building openings, and avoid fasteners that protrude into the airstream — the checklist our rough-ins are built on.
Manufacturer install manuals
Where the specified dryer's manual allows longer runs or requires specific fittings, the manual governs — we design to the actual appliance, not a placeholder.
Codes cited are the established national standards (IRC, UL) that govern this service. The adopted code edition, permit, and inspection requirements vary by city —Prime Dryer Vent verifies them with your local authority having jurisdiction on every job.
Our process
How a new-construction vent install job runs.
01
Plan review
We take the floor plan and dryer spec and return a routed vent design with length math and termination placement.
02
Framing-stage rough-in
Rigid metal duct is installed and supported, penetrations protected, and the exterior termination set and sealed to the envelope.
03
Pre-cover documentation
The full run is photographed and measured before insulation and drywall, creating a permanent record.
04
Trim-out and verification
At finish stage we connect the appliance with a listed transition, test airflow under load, and deliver the documentation package.
Why choose us
Why DFW homeowners pick Prime Dryer Vent for new-construction vent install.
We've worked on 0+ DFW homes over 15+ years. Every job — small vent cleaning or full rebuild — runs the same way: licensed & insured technicians, written quotes, photo reports, warranty in writing.
15+
Years experience
Licensed
& insured techs
22
Metros covered
Route plans with developed-length math submitted before framing closes, not improvised on site
Pre-drywall photo records that survive long after the walls are painted
Coordination with your schedule — rough-in at framing, connection and airflow test at trim-out
Work matched to both IRC M1502 and the specified dryer's installation manual
Who we are
Prime Dryer Vent Experts. 15+ years on DFW dryer vents.
Family-owned, licensed & insured, IRC M1502–compliant. We're the team you call when you want it done right the first time — no rotating subcontractors, no upsell pressure, no surprises. Same techs, same trucks, same standard.
Licensed & Insured
Residential venting & exhaust specialists
IRC M1502 Compliant
Code-compliant on every job
Owner on every job
Personal accountability, every time
1-year workmanship warranty
In writing, every job
Prime Dryer Vent
DFW Metroplex · Licensed & Insured
IRC M1502
Code compliant
New-Construction Vent Install by location
Dallas, TXPlano, TXFrisco, TXMcKinney, TXFort Worth, TXArlington, TXIrving, TXGarland, TXGrand Prairie, TXMesquite, TXRichardson, TXAllen, TXCarrollton, TXDenton, TXLewisville, TXFlower Mound, TXThe Colony, TXCoppell, TXGrapevine, TXSouthlake, TXColleyville, TXKeller, TXTrophy Club, TXWestlake, TXHighland Park, TXUniversity Park, TXAddison, TXFarmers Branch, TXDuncanville, TXDeSoto, TXCedar Hill, TXLancaster, TXRowlett, TXRockwall, TXWylie, TXSachse, TXMurphy, TXFairview, TXProsper, TXCelina, TXLittle Elm, TXArgyle, TXRoanoke, TXHaslet, TXNorth Richland Hills, TXHurst, TXEuless, TXBedford, TXWatauga, TXBurleson, TXMansfield, TXMidlothian, TXWaxahachie, TXEnnis, TXKaufman, TXTerrell, TXForney, TXHeath, TXFate, TXRhome, TXHouston, TXSugar Land, TXThe Woodlands, TXPearland, TXLeague City, TXConroe, TXMissouri City, TXAtascocita, TXKingwood, TXCypress, TXSpring, TXKaty, TXFriendswood, TXHumble, TXTomball, TXRichmond, TXAustin, TXRound Rock, TXCedar Park, TXGeorgetown, TXLeander, TXSan Marcos, TXPflugerville, TXKyle, TXHutto, TXLakeway, TXBuda, TXManor, TXBastrop, TXBee Cave, TXDripping Springs, TXSan Antonio, TXNew Braunfels, TXSchertz, TXCibolo, TXSeguin, TXConverse, TXBoerne, TXUniversal City, TXLive Oak, TXLeon Valley, TXFair Oaks Ranch, TXHelotes, TXAlamo Heights, TXFloresville, TXBulverde, TXGarden Ridge, TX
FAQ
Common questions about new-construction vent install.
How often should a dryer vent be cleaned?
For most households, once a year is the right rhythm. Push it earlier if the dryer runs daily, the run is long or has several elbows, you have pets, or the machine is gas-fired. The honest answer is measured, not guessed: if airflow at your termination is strong and drying times are normal, you can wait; if either slips, don't. Our inspections give you that measurement so the schedule fits your house instead of a generic calendar.
Do you clean air ducts, chimneys, or work on HVAC?
No. Dryer vents are the entire company — cleaning, inspection, repair, rerouting, rebuilds, and installs of the dryer exhaust system only. That's a deliberate choice, not a limitation: a crew that works on one system all day gets very good at it, and a visit from us never turns into a pitch for six other services. If your problem is outside the dryer vent, we'll say so plainly and you'll owe us nothing for the opinion.
How fast can you get to me?
In the Dallas–Fort Worth metro we can typically respond within about two hours for urgent calls — a fully blocked vent, a burning smell, a gas dryer you're worried about. Routine cleanings and inspections are usually scheduled within a couple of days. Outside DFW, in the Austin, San Antonio, and Houston metros, response depends on route density that week; we'll give you a real window when you call rather than a number we can't keep.
What does a visit actually cost?
Cleanings start at $99, inspections and diagnostics at $89, and repairs are quoted flat after we've scoped the duct. The published prices are true starting points; what moves them is physical: duct length, elbow count, second-story or roof access, and how compacted the lint is. You approve the exact number before any work starts, and the price we quote is the price you pay. No trip-fee surprises, no truck-side renegotiation.
What happens during a cleaning appointment?
We measure airflow at your outside hood first, so there's a baseline. Then the full run gets cleaned — rotary brush through the duct while a HEPA vacuum holds it under negative pressure, plus the transition hose behind the machine and the termination hood outside. We re-measure airflow, reset your dryer with proper clearance, and hand you a report with the before/after numbers and photos. Most homes take about an hour, and we leave the laundry room cleaner than we found it.
Last reviewed:
Related services
Other services in the New Construction & Commercial category.
15+
Years in the field
IRC M1502
Checklist
48h
Written report
< 2hr
Response
Ready when you are
Get it inspected. Get it in writing.
Flat fee confirmed when you book. Same-week scheduling. A pass/fail verdict within 48 hours.
Licensed & Insured Same-Week Scheduling Photo-Documented Findings
Emergency
24/7 Response
No airflow, overheating dryer, burning smell, or a vent you're not sure about? We answer 7 AM to midnight and the assessment ends in a written safe-to-use verdict — including a do-not-use notice when the evidence supports one. After-hours dispatch runs subject to crew availability.
Emergency line