Full Vent Rebuild & Replacement
Complete replacement of failed or illegal duct with code-compliant metal.
Learn moreRepair & Replacement · From $89
Transition Hose Replacement
The short hose between the dryer and the wall is the most abused part of the whole system — crushed when the machine gets pushed back, kinked into a lint trap, and often made of plastic that has no place near a heat source. We replace it with a semi-rigid aluminum transition duct listed to UL 2158A, the safety standard written for exactly this part, cut to the correct length with no excess coiled behind the machine. We reset the dryer with proper clearance so the new connector stays round, then verify airflow. It's a thirty-minute fix that removes one of the most common ignition points in the laundry room.
Duration
30–45 minutes
Warranty
1-year workmanship
Credentials
Licensed & Insured
Human reply
< 2 min
What is it
What is transition hose replacement?
The transition duct is the short flexible connector between the dryer and the wall inlet — the only part of the system most homeowners ever see, and the part most often wrong. Thin plastic and coiled-spring foil hoses kink, crush against the wall, and sit inches from a heat source they were never rated for. The correct part is a semi-rigid aluminum duct listed to UL 2158A, the product safety standard written specifically for dryer transition ducts, installed at the shortest workable length with no coils and no kinks. Replacement takes under an hour and removes one of the most common ignition points in the laundry room.
Common signs you need this service
- The hose behind your dryer is white plastic or crinkly thin foil
- The duct is visibly kinked, dented, or flattened where the machine meets the wall
- Lint puffs into the room from behind the dryer during a cycle
- The connector has slipped off the dryer or wall stub before
- There's far more hose than the gap needs, looped behind the machine
- Scorch marks or brittleness anywhere on the existing hose
Every transition hose replacement includes:
- UL 2158A-listed semi-rigid aluminum transition duct
- Cut to correct length — no kinks, no coiled excess
- Secure, sealed connections at dryer and wall
- Dryer repositioned with clearance to protect the new duct
Materials we use
UL 2158A-listed semi-rigid aluminum transition ductWorm-gear clamps sized to the connectionsUL-listed foil tape for the wall inlet joint
Scoped from a camera inspection
At Prime Dryer Vent Experts, a transition hose replacement is never guesswork. We scope every job from a camera vent inspection first — mapped route, measured developed length against IRC M1502, and airflow readings — so the work is matched to what your duct actually needs, with the report to prove it. The documented inspection is the record the transition hose replacement is built on.
Camera vent inspectionBuilt to code
The code your transition hose replacement has to meet.
A transition hose replacement isn't a matter of opinion — it's held to published national standards. Prime Dryer Vent builds every job to the named codes below and documents it, so the work is provably right for an inspector, an insurer, or a future buyer. These are the universal standards; your city's permit and inspection requirements are confirmed with the local authority before we pull the job.
IRC M1502UL 2158AIRC
UL 2158A
The listing standard for dryer transition ducts — the connector behind the machine must carry this listing to be code-legal.
IRC M1502
Transition ducts are limited to a short, single length, must remain accessible, and cannot be concealed inside walls, floors, or ceilings.
Codes cited are the established national standards (IRC, UL) that govern this service. The adopted code edition, permit, and inspection requirements vary by city —Prime Dryer Vent verifies them with your local authority having jurisdiction on every job.
Our process
How a transition hose replacement job runs.
01
Pull and inspect
We move the dryer, remove the old connector, and inspect the wall inlet and the machine's exhaust collar for lint and damage.
02
Fit the listed duct
A UL 2158A semi-rigid aluminum duct is cut to the true distance and formed with sweeping bends, never tight kinks.
03
Secure connections
Both ends are clamped and sealed — no screws through the duct wall where lint could snag.
04
Reset and verify
The dryer is repositioned with protective clearance and we confirm airflow at the outside hood with the machine running.
Why choose us
Why DFW homeowners pick Prime Dryer Vent for transition hose replacement.
We've worked on 0+ DFW homes over 15+ years. Every job — small vent cleaning or full rebuild — runs the same way: licensed & insured technicians, written quotes, photo reports, warranty in writing.
15+
Years experience
Licensed
& insured techs
22
Metros covered
Only UL 2158A-listed semi-rigid aluminum — never plastic, never bargain foil
Cut to fit your actual gap, because coiled excess is a built-in lint trap
The dryer goes back with spacing that keeps the new duct round
We check the wall inlet and lint screen while we're behind the machine — no extra charge
Who we are
Prime Dryer Vent Experts. 15+ years on DFW dryer vents.
Family-owned, licensed & insured, IRC M1502–compliant. We're the team you call when you want it done right the first time — no rotating subcontractors, no upsell pressure, no surprises. Same techs, same trucks, same standard.
Licensed & Insured
Residential venting & exhaust specialists
IRC M1502 Compliant
Code-compliant on every job
Owner on every job
Personal accountability, every time
1-year workmanship warranty
In writing, every job
Prime Dryer Vent
DFW Metroplex · Licensed & Insured
IRC M1502
Code compliant
Transition Hose Replacement by location
Dallas, TXPlano, TXFrisco, TXMcKinney, TXFort Worth, TXArlington, TXIrving, TXGarland, TXGrand Prairie, TXMesquite, TXRichardson, TXAllen, TXCarrollton, TXDenton, TXLewisville, TXFlower Mound, TXThe Colony, TXCoppell, TXGrapevine, TXSouthlake, TXColleyville, TXKeller, TXTrophy Club, TXWestlake, TXHighland Park, TXUniversity Park, TXAddison, TXFarmers Branch, TXDuncanville, TXDeSoto, TXCedar Hill, TXLancaster, TXRowlett, TXRockwall, TXWylie, TXSachse, TXMurphy, TXFairview, TXProsper, TXCelina, TXLittle Elm, TXArgyle, TXRoanoke, TXHaslet, TXNorth Richland Hills, TXHurst, TXEuless, TXBedford, TXWatauga, TXBurleson, TXMansfield, TXMidlothian, TXWaxahachie, TXEnnis, TXKaufman, TXTerrell, TXForney, TXHeath, TXFate, TXRhome, TXHouston, TXSugar Land, TXThe Woodlands, TXPearland, TXLeague City, TXConroe, TXMissouri City, TXAtascocita, TXKingwood, TXCypress, TXSpring, TXKaty, TXFriendswood, TXHumble, TXTomball, TXRichmond, TXAustin, TXRound Rock, TXCedar Park, TXGeorgetown, TXLeander, TXSan Marcos, TXPflugerville, TXKyle, TXHutto, TXLakeway, TXBuda, TXManor, TXBastrop, TXBee Cave, TXDripping Springs, TXSan Antonio, TXNew Braunfels, TXSchertz, TXCibolo, TXSeguin, TXConverse, TXBoerne, TXUniversal City, TXLive Oak, TXLeon Valley, TXFair Oaks Ranch, TXHelotes, TXAlamo Heights, TXFloresville, TXBulverde, TXGarden Ridge, TX
FAQ
Common questions about transition hose replacement.
How often should a dryer vent be cleaned?
For most households, once a year is the right rhythm. Push it earlier if the dryer runs daily, the run is long or has several elbows, you have pets, or the machine is gas-fired. The honest answer is measured, not guessed: if airflow at your termination is strong and drying times are normal, you can wait; if either slips, don't. Our inspections give you that measurement so the schedule fits your house instead of a generic calendar.
Do you clean air ducts, chimneys, or work on HVAC?
No. Dryer vents are the entire company — cleaning, inspection, repair, rerouting, rebuilds, and installs of the dryer exhaust system only. That's a deliberate choice, not a limitation: a crew that works on one system all day gets very good at it, and a visit from us never turns into a pitch for six other services. If your problem is outside the dryer vent, we'll say so plainly and you'll owe us nothing for the opinion.
How fast can you get to me?
In the Dallas–Fort Worth metro we can typically respond within about two hours for urgent calls — a fully blocked vent, a burning smell, a gas dryer you're worried about. Routine cleanings and inspections are usually scheduled within a couple of days. Outside DFW, in the Austin, San Antonio, and Houston metros, response depends on route density that week; we'll give you a real window when you call rather than a number we can't keep.
What does a visit actually cost?
Cleanings start at $99, inspections and diagnostics at $89, and repairs are quoted flat after we've scoped the duct. The published prices are true starting points; what moves them is physical: duct length, elbow count, second-story or roof access, and how compacted the lint is. You approve the exact number before any work starts, and the price we quote is the price you pay. No trip-fee surprises, no truck-side renegotiation.
What happens during a cleaning appointment?
We measure airflow at your outside hood first, so there's a baseline. Then the full run gets cleaned — rotary brush through the duct while a HEPA vacuum holds it under negative pressure, plus the transition hose behind the machine and the termination hood outside. We re-measure airflow, reset your dryer with proper clearance, and hand you a report with the before/after numbers and photos. Most homes take about an hour, and we leave the laundry room cleaner than we found it.
Last reviewed:
Related services
Other services in the Repair & Replacement category.
15+
Years in the field
IRC M1502
Checklist
48h
Written report
< 2hr
Response
Ready when you are
Get it inspected. Get it in writing.
Flat fee confirmed when you book. Same-week scheduling. A pass/fail verdict within 48 hours.
Licensed & Insured Same-Week Scheduling Photo-Documented Findings
Emergency
24/7 Response
No airflow, overheating dryer, burning smell, or a vent you're not sure about? We answer 7 AM to midnight and the assessment ends in a written safe-to-use verdict — including a do-not-use notice when the evidence supports one. After-hours dispatch runs subject to crew availability.
Emergency line